Reasons Why Your Nissan Qashqai Key Fob Won't Work
The Qashqai's greater dimensions give it a distinct SUV-like feel. Its 19-inch alloy wheels on Ti and STL versions can also be a bit firm. The front tyres on the Qashqai can also lose grip on bumpy surfaces, and its CVT can sometimes display a wrist-flexing torque steering.
This is usually caused by the battery being dead, which can be replaced in a matter of minutes. Make sure the replacement battery is of the same voltage, size and specification.
Water Damage
One of the main reasons a Nissan key fob will give the "key ID is not correct" message is due to water damage. The rubber seals on the key fob guard the chip's electronic circuit, but prolonged exposure to moisture can cause it to not function properly. This is usually the case if you've dropped your key fob into the ocean or a pool pool, but it can occur if it becomes wet due to soapy hands or rain.
If your key fob is exposed to water for a lengthy period of time, it could need to be cleaned with isopropyl alcohol or electronic cleaner. In addition, it may require taking to an expert for repair or replacement.
If your key fob requires to be replaced, it's a relatively simple procedure. First, ensure that you have a multipack of the right battery (CR2032 3V). Open the front and rear cases using the flat-head screwdriver. Remove the clips made of metal, then remove the battery, and then replace it. After reassembling your fob, put the mechanical key back in place and verify that it is working correctly. If it isn't then you'll need to take it to your local Nissan dealer or a professional auto locksmith to replace the chip that controls the key. The chip isn't usually damaged by water and shouldn't be too expensive.
Dead Coin Battery
Another reason why your Nissan Qashqai key fob may not work is because the battery in the coin has gone dead. The batteries last for about three to five years, but can become faulty over time when the fob is dropped often. You could replace the battery but make sure it is the same voltage and the same dimensions as the original. If you choose to use an alternative battery, it could cause the key to have an incorrect key ID, which will prevent it from pairing with your vehicle.
The best method to replace the battery of a coin on a Nissan Qashqai key fob is by opening the fob with the small screwdriver with a flat-head. The screwdriver needs to be inserted into a small notch at the bottom of your key fob. Make sure to gently twist the screwdriver to divide the two halves. Remove the old CR2025 battery and replace it with a brand new one, observing the position of the previous one inside the fob.
Examine the terminals to see if there is water damage or dirt before installing the new battery. If so clean the terminals with a small amount isopropyl ethanol. You'll also want to make sure the pole cables are connected properly - they must be connected to the negative and positive poles of the battery, respectively.
Troubleshooting
If your Nissan Qashqai's keys fob doesn't function after being exposed to clean water from the tap or rain it could be a sign there is an issue with the internal chip. You'll need a new keyfob in the event that you can't resolve the issue by changing the battery. If the key fob has stopped working after dropping it, it's likely that the chip inside was damaged. You can usually get the key fob back to work once again if it is removed and clean the chip using alcohol and paper towels before putting it back into.
Key ID Incorrect is a typical error that can be seen on the dashboard of your car. This means that the vehicle is unable to recognize the key fob and will not allow it to start the engine. The problem can be caused by a variety of things like water damage, undetectable problems in the key fob's circuitry, or RFID interference.
The key fob won't work in the event that the 12 volt batteries are dead or don't provide enough electrical current. This could affect the Nissan Qashqai's remote keyless system, central locking and the capability to start the engine with the key fob. If you're unable lock or unlock the door by hand it is recommended to check the batteries inside your key fob to be sure they're in good condition. You may also try reconnecting the battery in order to reset your transmitter.
Reprogramming
If the key fob has not been submerged in salt water the device should be able to come back to life after a quick wash with clean water. You can also clean the electronic chip by using isopropyl or electronic cleaner. If none of these work, you may need to replace the key fob.
If your Nissan Intelligent Key still does not function, there may be a problem with the connection between it and your vehicle. To relink it, start by turning the key in the ignition without starting the car. Repeat this process until the hazard lights flash twice. Then, turn off the vehicle and remove the key.
Open the fob compartment in your vehicle. It's usually located on the door jamb or the handle of the door for the driver. Find the small button labeled "program" and press it. You will hear a sound once the process is complete.
Now that your Intelligent Key is relinked to the car It's time to test it out. Stand some distance away from the vehicle, then press all the buttons on the key. If nissan qashqai key and the horn sounds it means the key has successfully linked to the Nissan. You can also test it in close proximity.